Dynamic Garage Door

Try Simple Troubleshooting Tips if Your Garage Door is Not Opening Correctly

Try Simple Troubleshooting Tips if Your Garage Door is Not Opening CorrectlyA garage door opener that is powered by electricity might be incredibly beneficial. When your garage door won’t open or shut, the remote malfunctions, or the keypad malfunctions, it’s annoying and inconvenient. A broken garage door opener may make it difficult to get to anything kept within, and it can also cause issues if you utilize the area to park your car.

What options do you have? You might be able to repair the problem yourself if you follow the steps below. This may necessitate some time and resources on your behalf. Contact a garage door specialist for a skilled repair so that you may enjoy maximum functionality for a long time by calling Dynamic Garage Door at 855-343-3667.

The remote control for your garage door isn’t working

If nothing happens when you press the buttons on your remote, you may be out of range or the batteries need to be replaced. It’s also possible that your garage door sensors aren’t correctly aligned, which would explain why things aren’t working.

Sensors near the ground on each side of the door immediately inside the garage serve as a safety feature for your garage door. These function by sending light beams to one another. The door will not close if these sensors are not correctly aligned. They should clean their lenses and double-check their placements. Wiggle them around to see if that solves the problem. If not, you might need to get a new one.

The wall switch isn’t turning on

You’ve tried using the wall switch to close or open your door, but it won’t move. A lock option is available on several switches. Make sure this is turned on. If this is the case, disable it. Make sure the motor that runs your garage door on the ceiling is plugged in as well. This might be the issue if it isn’t. It’s also possible that you’ve blown a fuse in some way. Check your circuit breaker and, if required, reset it.

The keypad for opening your garage door is broken

The batteries within the keypad at the entrance of your garage are usually dead when it doesn’t operate. It may be possible to solve the problem by installing fresh ones.

It’s also possible that your keypad has to be reprogrammed. For instructions on how to reset the keypad system, consult the handbook. If it doesn’t work, make sure the antenna on the ceiling-mounted motor is facing in the right direction. If required, readjust it according to the manual’s instructions.

Have you misplaced your manual? Don’t worry, there are plenty of internet tools available to assist you. You should be able to find the handbook for your garage door opener by searching for it online. If not, you may always contact a reputable garage door repair business for assistance.

The motor is on, but the door would not open

When the motor operates but the garage door doesn’t move, it’s possible that the door isn’t attached to the belt. This can happen if the emergency release cord has been pulled in the past. Reconnecting the belt may be able to solve your issue. If not, you may need to contact a technician to assess the situation.

It might be that you need a new garage door. Whatever the situation, contact Dynamic Garage Door at 855-343-3667 to get help today.

Comments are closed.

Call us today at 855-343-3667 or

Contact Us For a Free Quote