What Should I Do If One of my Broken Garage Door Springs in Yorba Linda CA Needs Replacing?

If one of your broken garage door springs in Yorba Linda needs replacing, you may be tempted take care of it yourself. Here’s why that might not be a good idea.

You Might Not Know to Replace Both Springs

Only replacing the broken spring is a pretty common error in DIY garage door repair. If you had hired an expert, they would have told you that springs break because they get fatigued, and they generally get fatigued at about the same rate. So if one spring has broken, the other will soon follow. You can save a lot of time and trouble by replacing them both at once.

Garage Door Springs Are Dangerous

You probably know that the torsion springs used to raise and lower your garage door are under a lot of tension. That’s what gives them the power to lift a heavy garage door. Because you need to replace both springs at once, you will end up needing to unwind a live spring. There are specific steps that must be followed and specific tools that must be used in order to prevent serious injury. If you have any doubts about your ability to safely unwind an old spring (and rewind the new ones) you should not attempt this repair yourself.

It’s Easy to Buy the Wrong Springs

Putting the wrong springs on the wrong door is another common DIY garage door repair error. To find the right springs, you will need to know your old torsion spring dimensions, your cable drum radius, your track radius, and your garage door weight, model, and size. Of course, this is assuming you had the correct springs on there in the first place! To make absolutely sure you get the right springs, you should hire a pro to take a look at your broken garage door springs in Yorba Linda.

It’s Hard to Install Springs Correctly

Did you know that there is a left spring and a right spring on your garage door? If not…you probably shouldn’t be trying to repair them! Besides getting the right spring on the right side, you also have to wind the new springs to the correct tension level and then adjust the various bearings and cables to make sure the door raises and lowers evenly

Improperly Installed Springs Can Ruin Your Garage Door

If you don’t get your springs installed just right, your door will be unbalanced and will not work smoothly. The extra strain placed on the door will start to damage various plastic parts or even warp the metal of your tracks. Opening a steel garage door on a broken spring can bend and break your door, and attempting to open a heavy wooden door can burn out your opener motor.

Don’t risk it! Get help from a professional and make sure your broken garage door springs in Yorba Linda get replaced right the first time.